MOLD TEMPERATURE CONTROLLERS THD-F/H series
2007.04.24

F seriesH series Water high temperature type

Model F series
  • HMC-F593A、HMC-F716A、HMC-F403O、HMC-F758O
  • PID control for heating and cooling ensures tight temperature control.

Model H series Water high temperature type (up to 120℃)

  • HMC-F554H、HMC-F558H、HMC-F754H、HMC-F758H
  • PID control for heating and cooling ensures tight temperature control.
 
Features
  • Nineteeen percents smaller footprint than our predecessor.
  • Larger set value and process value display.
  • Almost the same cotrol panel as THD-F series dryer.
  • Mold memory allows you to save 100 setups of set value and timer value.
  • Start timer is settable up to 99 hours and 59 minutes.(15 hour battery backup)
  • Stop timer is settable up to 99 hours and 59 minutes.
  • Display power off turns off display during start timer run for energy saving.
  • Maintenance notification notifies you when you should service,according to the predetermined time.
  • Infrared remote control (option) allows cable-less remote operation.
  • Temperature monitor (option) issues alarm if the set value is not reached during the specified time period.
  • Returnt temperature monitor (option) display return fluid temperature with differential between the return and supply temperatures.
  • Mold memory reset (option) externally changes the current mold memory no. to 00.
  • External output indicates what process temperature is normal and/or what differential temperature is normal,in operation.
 

Controller

Controller
 

Option

  • Communication with HRX-i series robot
  • Fluid hose
  • Hose fittings
  • Air purge
  • 24 hour time switch
  • Weekly time switch
  • Audible alarm
  • Signal light
  • RS485 communication
  • Mold memory no. reset
  • Infrared remote control
  • External output
  • Temperature monitor
  • Different voltage
  • Earth voltage breaker
  • Remote control input
  • External sensor
  • Return temperature sensor
  • Power plugs
  • 4-port manifold
  • Cooling water filter
  • Custom color
 

Specification HMC F series

MODELHMC-F539ＡHMC-F403ＯHMC-F716ＡHMC-F758Ｏ
Power supply (v)3 phase 200AC(50/60HZ)
FluidWaterOilWaterOil
Temperature control range *1 (℃)50〜9560〜16050〜9560〜160
Pump motor0.59 k W2P(50Hz/60Hz)0.4 k W4P(50Hz/60Hz)0.71 k W2P(50Hz/60Hz)0.75 k W4P(50Hz/60Hz)
Pump typeMulti stage centrifugalCascade seallessMulti stage centrifugalCascade sealless
Pump pressure
*2		60Hz0.38MPa
(at 20L/min)		0.39MPa
(at 10L/min)		0.48MPa
(at 20L/min)		0.76MPa
(at 16L/min)
50Hz0.24MPa
(at 20L/min)		0.26MPa
(at 10L/min)		0.32MPa
(at 20L/min)		0.56MPa
(at 16L/min)
Pump flow
*2		60Hz50L/min
(at 0.28MPa)		15L/min
(at 0.30MPa)		50L/min
(at 0.36MPa)		46L/min
(at 0.15MPa)
50Hz50L/min
(at 0.16MPa)		15L/min
(at 0.19MPa)		50L/min
(at 0.21MPa)		39L/min
(at 0.15MPa)
Heater3.0ｋW3.0ｋW6.0ｋW8.0ｋW
Control methodHeating/Cooling PID
Rated current13A12A22A28A
Cooling methodDirectIndirectDirectIndirect
Capacity (L)1.3(Entire 2.3L)2.5(Entire 4.0L)1.8(Entire 2.8L)2.5(Entire 12.0L)
Weight (kg)48.052.055.093.0
*1.The lower temperature limit of HMC-F 593A&716A canvary with the temperature of supplied water.
*2.Pump pressure and flow are based on water application.
 

Specification HMC H series

MODELHMC-F554ＨHMC-F558ＨHMC-F754ＨHMC-F758Ｈ
Power supply (v)3 phase AC200(50/60HZ)
FluidWater
Temperature control range *1 (℃)50〜120
Pump motor0.55kW 2P0.75 kW 2P
Pump typeMulti stage centrifugal
Pump pressure *260Hz0.32MPa
(at 13L/min)		0.41MPa
(at 24L/min)
50Hz0.23MPa
(at 13L/min)		0.29MPa
(at 20L/min)
Pump flow *260Hz45L/min
(at 0.15MPa)		75L/min
(at 0.21MPa)
50Hz35L/min
(at 0.14MPa)		65L/min
(at 0.14MPa)
Heater4.0ｋW8.0ｋW4.0ｋW8.0ｋW
Control methodHeating/Cooling PID
Rated current14A26A15A26A
Cooling methodDirect
Capacity (L)approx.1.2approx.2.4approx.1.2approx.2.4
Weight (kg)67.073.070.076.0
*1.The lower temperature limit of HMC-F 593A&716A canvary with the temperature of supplied water.
*2.Pump pressure and flow are based on water application.
 
HARMO Co., Ltd. Web Site
HARMO
HARMO http://www.harmo-net.co.jp

EnplaNet : HARMO Co., Ltd. TopPage


BACK Back