---

METABLEN A type is an epoch-making processing aid for thermoplastics. With small amount of addition, it greatly improves the melt tension that is required in such processing as vacuum molding, foam molding, blow molding and profiling by minimizing increases in melt viscosity without sacrificing the inherent properties of thermoplastics.

Matrix Resin:Thermoplastics
Grade	Type	Effect	Merit
A-3000	Processing aid Anti-dripping agent	Melt tension Die swell Filler dispersibility Foaming expansion ratio Anti-dripping	Excellent appearance Excellent treatment High foaming expansion ratio

*Product is powder and PP/PE master batch.

More Information (METABLEN Home Page)

---

METABLEN C, E, W and S type are a family of core-shell type impact modifiers, each of which offers unique benefits to manufacturers of thermoplastics products. These impact modifiers do not only improve impact strength but also give other additional benefits depending on the selection of rubber. METABLEN C and E type have butadiene-based rubber to give super high impact strength. METABLEN W type has acrylic-based rubber to give excellent weatherability. METABLEN S type has silicone-acrylic-based rubber to achieve both super high impact strength and excellent weatherability.

Matrix Resin:
PC : Polycarbonate PS : Polystyrene PP : Polypropylene PET : Polyethylene terephthalate PVC : Polyvinyl chloride PA : Polyamide PE : Polyethylene PBT : Polybutylene terephthalate ABS : Acrylonitrile-Butadiene-Styrene resin PMMA : Polymethyl methacrylate
Type		Grade	Characteristic	Matrix Resin
S	Silicone- acrylic rubber	S-2001	Weatherability, High impact, Impact resistance at low temperature	PC, PBT, PA, PET,PS, PVC, ABS, PMMA
		SRK200	Heat resistance, Impact resistance at low temperature
		SX-006	Coloring ability, Flowability, Chemical resistance
W	Acrylic rubber	W-450A	High impact, Weatherability	PC, PBT, PVC, PMMA
		W-341	Soft acrylic resin (Details)	PMMA
C	MBS (Butadiene rubber)	C-223A	High impact	PC, PBT, PA, PS, PVC

More Information (METABLEN Home Page)

---

METABLEN L type is an acrylic external lubricant that offers exceptional benefits to PVC processors with addition of very low levels. The low use levels mean that there will be scarcely effect on clarity, heat stability, chemical resistance and physical properties. As METABLEN L type introduces low haze contribution and excellent metal release, it is ideal for calendering, blow molding and extrusion applications.

Matrix Resin:
PC : Polycarbonate ABS : Acrylonitrile-Butadiene-Styrene resin PMMA : Polymethyl methacrylate PO : Polyolefin PEs : Polyester PVC : Polyvinyl chloride
Grade	Effect	Merit
L-1000	Metal release Lubricity No acceleration of the fusion for Polyvinyl chloride(PVC)	Long term lubricity Deposit Plate out Bleeding Less power torque

More Information (METABLEN Home Page)

---

METABLEN P type is an acrylic processing aid that offers significant benefits to processors of PVC, ABS, polycarbonate and other thermoplastics. METABLEN P type greatly improves the melt elasticity of thermoplastics and promotes fusion of PVC with addition of low use levels. These products are designed to offer maximum dispersability in much kind of thermoplastics. METABLEN P type is possible to correspond wide range of molecular weight.

Matrix Resin:
PC : Polycarbonate PVC : Polyvinyl chloride ABS : Acrylonitrile-Butadiene-Styrene resin PMMA : Polymethyl methacrylate
Grade	Type	Effect	Merit
P-530A P-551A P-570A	Molecular weight High Low	Acceleration of fusion Melt elasticity	Improve appearance Dispersion of fillers Jetting (Injection molding) Flow mark, Air mark (Calendering) Deep-drawing (Vacuum forming) Uniformity of foamed cell
P-700	Lubricant type (high molecular weight)	Acceleration of fusion Melt elasticity Lubricity	Deposit Metal release

More Information (METABLEN Home Page)