|
HOP Five 450 1000 |
| Clamping force:30350ton |
|
|
Equipped with ample functions in its compact body
|
The robust construction supports the stable take-out operation.
|
Equipped as standard with highly-functional GII-type controller.
|
| Multilingual display selection (optional). |
|
This comes standard with a GII-type controller,which is available with an optional multilingual display function oriented the international market. |
|
|
|
| TWINHOP G-450550 |
| Clamping force:30100ton |
|
|
| Three-plate molds are supported |
|
Two arms are provided for both the product and the runner sides, allowing small products and runners to be taken out simultaneously.
|
| A vacuum unit can be installed. |
|
A compact vacuum end of arm tool can be installed on the main arm.
|
| Multilingual display selection (optional). |
|
This comes standard with a G-type controller,which is available with an optional multilingual displays election function oriented to the international market. |
|
| Model |
TWINHOP G-450 |
TWINHOP G-550 |
| Storke |
Descent (mm) |
450 |
550 |
| Kick (mm) |
90 |
| Swing |
Min.50  Max.90 |
| Chuck position (mm) |
Waiting position adjustable 60 |
Air consumption
( (normal)/cycle) |
16 |
18 |
| Maximum weigh capacity |
2Kg |
| Robot weight |
47Kg |
48Kg |
|
|
| miniHOP-G300 |
| Clamping force:30ton |
|
|
| Runner take-out robot for compact molding machines |
|
This robot is designed for molding machines with a clamping force of 30 tons or less.
|
| Multilingual display selection (optional) |
|
This comes standard with a G-type controller,which is available with an optional multilingual displays election function oriented to the international market. |
|
| Model |
miniHOP-G300 |
| Storke |
Descent (mm) |
300 (350 : Extended Type) |
| Kick (mm) |
1530 (3550 : Extended Type) |
| Swing |
50, 60, 80(Variable among three positions) |
| Chuck position |
Waiting position adjustable range 65mm |
Air consumption
((normal)/cycle) |
4 |
Maximum payload
(Including end-of-arm tool) |
1Kg |
| Robot weight |
18kg |
|
|
|
|
| N - HOP-G 450900 |
| Clamping force:30350ton |
|
|
| A servo motor is used on the kick axis. |
|
An NC control servo motor drive makes it possible to adjust the kick stroke with the controller rather than the conventional method of manual adjustment on the robot.
|
|
| Model |
N-HOP-G
450 |
N-HOP-G
550 |
N-HOP-G
650 |
N-HOP-G
750 |
N-HOP-G
900 |
| Storke |
Descent (mm) |
450 |
550 |
650 |
750 |
900 |
| Kick (mm) |
350 |
620 |
| Swing |
Min.50Max.90 |
| Chuck position (mm) |
Waiting position adjustable 100 |
Air consumption
((normal)/cycle) |
11 |
13 |
15 |
17 |
19 |
| Maximum weigh capacity |
2Kg |
| Robot weight |
28Kg |
29Kg |
30Kg |
32Kg |
33Kg |
|
|
|
Yushin Precision Equipment Co.,Ltd. HomePage
EnplaNet : Yushin Precision Equipment Co.,Ltd. TopPage
|
|
 |
1000 ( Clamping force:30
350ton)
