|
 |
|
Take-out robot for vertical molding machine
|
|
|
|
|
|
V - HOP 350 750 |
| Clamping force:20150ton |
|
|
| Runner take-out robots for vertical clamp molding machines |
|
These are very effective when taking out runners from vertical clamp molding machines
|
| Swing function |
|
The angle of rotation can be adjusted between 60 and 90 degrees, allowing runners to be released at any location.
|
| Applicable to product take-out from either the lower or upper mold. |
|
Products can be taken-out from either the lower or upper mold half simply by changing settings.
|
| Multilingual display selection (optional). |
|
This comes standard with a G-type controller,which is available with an optional multilingual displays election function oriented the international market. |
|
| Model |
V-HOP350 |
V-HOP450 |
V-HOP550 |
V-HOP650 |
V-HOP750 |
| Storke |
Entry (mm) |
350 |
450 |
550 |
650 |
750 |
| Descent (mm) |
90 |
| Swing |
Min.60  Max.90 |
| Transverse standby position adjustment (mm) |
Waiting position adjustable range 100 |
Air consumption
( (normal)/cycle) |
No reversal |
8 |
10 |
12 |
14 |
16 |
| Reversal possible |
12 |
14 |
16 |
18 |
20 |
| Maximum weigh capacity |
1.5Kg |
| Robot weight |
37Kg |
38Kg |
39Kg |
42Kg |
43Kg |
|
|
|
| J - HOP 650 R/RX - R/L |
| Clamping force:20100ton |
|
|
| Sprue picker for vertical molding machine |
|
This robot is applicable for runner extraction out of small-size molding machine.
|
| Compact design for space-saving |
|
It offers enough horizontal moving distance, 1380mm maximum from mold center to sprue runner release point, even though the overall robot width is approximately half of the conventional model.
|
| Stable high-speed operation with servo motor |
|
Equipped with a servo-driven joint arm, it saves overhang floor space from a molding machine given to a take-out robot body. That enables crusher setting close to the rear-side of the molding machine. Additionally, it offers reduction of take-out cycle time.
|
|
| Model |
J-HOP
650R-R |
J-HOP
650R-L |
J-HOP
650RX-R |
J-HOP
650RX-L |
| Storke |
Entry (mm) |
Stroke 680 / Release position 1380*1 (1680)*2 |
| Descent (mm) |
90 |
| Swing |
Selection from 0, 45, 90, 135, 180 |
| Air consumption((normal)/cycle) |
2.6 |
| Maximum weigh capacity |
1Kg |
| Robot weight |
40Kg |
|
*1 Standard --- rotating radius 350mm
*2 ( )dimension --- rotating radius 500mm
|
|
Side entry high cycle 2-axis servo-driven robot
SVR-B50 |
| Clamping force: For product extraction 150 ton / For insert system 50 ton |
|
|
| Adoption of special double-speed mechanism on traverse axis |
|
Special double-speed mechanism with two-stage slide is adopted on the extraction arm. This adoption removes the projection of the arm. That makes the robot compact to realize saving space.
|
| High rigidity |
|
This robot including its arm is designed to be highly rigid for insert molding which requires high precision.
|
| High-speed operation |
|
This robot realizes 1.58 second full dry-cycle time composed of work-insert time and product -extraction time.
|
| Adoption of the color liquid-crystal touch display controller |
|
This robot is equipped with high-functional controller as standard, which has both touch panel and function key.
|
 |
| Adoption of the thin-type arm |
|
This robot's arm can enter even narrow mold opening space.
|
| Applicable for high-speed runner extraction |
|
This robot can be also used for high-speed runner extraction out of the vertical molding machine because of its high-speed operation.
|
| <SVR-B50> |
 | Take-out time 1.58 seconds |
| *Based on dry-cycle measurement conditions as specified by Yushin. |
|
|
| Model |
SVR-B50 |
| Traverse stroke(mm) |
700 <450:for runner extraction> |
| Kick Stroke(mm) |
200 |
| Maximum power consumption |
Single phase AC200V 6.9A |
| Air consumption((normal)/cycle) |
33.3 (Double Product vacuum circuit) |
| Maximum payload (Including end-of-arm tool) |
Less than 5Kg* |
| * The payload varies with the robot speed setting. |
|
|
Yushin Precision Equipment Co.,Ltd. HomePage
EnplaNet : Yushin Precision Equipment Co.,Ltd. TopPage
|
|
 |
750 ( Clamping force:20
150ton)
